|
Search
Contact Us
About Custom Fab and Body
Fire Apparatus
Rescue Apparatus
Refurbishments
Commercial Applications
Product Gallery
Map / Directions
Main
You can also
download a
print-able
data sheet
|
Custom Fab and Body Recent Deliveries
Dike Fire Department, IA
Dike Iowa
Aluminum Bodied Pumper - Rescue
This pumper for Dike, IA was built on a Chevrolet C8500
chassis with a CAT C7 diesel engine and an Allison automatic
transmission. The water pump is a Waterous CS 1000pm single
stage pump. The pump and controls are mounted in a side control
pump house equipped with Gortite rollup door at each side of the pump
house. Above the pump controls there is storage for a stokes
basket and long boards. The cross-lays are vertically stacked at
the top front of the pump house. The bottom cross-lay is
supplied with a removable tray to aid in repacking hose. Below
the cross-lays there is storage for four (4) spare SCBA bottles at
each side. The apparatus body is an all aluminum structure with
high side compartments and Gortite rollup doors at each side and rear.
There are numerous shelves and rollout trays installed for storage of
equipment. The ladders and pike poles are stored in a slide in
rear compartment at the right side with hard suction hose at the left
side. The apparatus has a 1000 gallon Poly water tank with a 20
gallon foam cell for future hookup. The truck is equipped with
all Whelen halogen emergency lights and siren.
|
For more information about this Aluminum Pumper - Rescue contact:
Custom Fab
and Body
158 U.S. Hwy 45
Marion WI 54950
Phone: (715) 754-5316
Fax: (715) 754-2903
For General Sales Information, email
sales@cfbody.com
Visit our web site @ www.cfbody.com
|
|