Custom Fab and Body
Cost Competitive, Quality Designed Truck Bodies


  Contact Us

  About Us

  Fire Apparatus

  Rescue Apparatus


  Commercial Applications

  Product Gallery

  Map / Directions


  You can also
download a
data sheet

/home /pumper /excelsior mn pumper

Custom Fab and Body Recent Deliveries
Shorewood, MN

 Excelsior Fire District, Shorewood Minnesota
Custom Pumper-Tanker

      This pumper-tanker apparatus is built on a Spartan Metro Star MFD 10� raised roof cab and chassis.  The truck is powered with a Cummins ISC 380HP diesel engine and an Allison 3000EVS automatic transmission.  The fire pump is a Waterous CSU 1250GPM single stage midship pump equipped with a Waterous Advantus 6 foam injection system and an off-board pickup system.  The apparatus is plumbed to various discharges on the apparatus of varying sizes to meet the department specifications.  The water tank is an Integra Plastics Products 1950 gallon water and 30-gallon foam tank.  The tank is equipped with three (3) Newton electric dump valves and telescoping extension chutes at the rear and sides and is also supplied with a 4� rear direct tank fill with a TFT Inlet valve.  The body is an all extruded aluminum structure with hinged flush mount compartment doors.  There is wheel well SCBA bottle storage for up to six (6) spare SCBA bottles with hinged doors.  The right side of the body is equipped with both a Ziamatic Corporation portable tank system with a painted outer panel to match the body and a Ziamatic Corporation outside arm overhead ladder rack.  A specially designed compartment sized to fit a Hannay electric cable reel equipped with 200� of 10/3 cable and an Akron junction box are located at the rear of the apparatus body below the rear dump valve.  Providing 120/240VAC power to the apparatus is an Onan 10kw hydraulic generator.  The generator supplies power to multiple electrical outlets and two (2) Fire Research Optimum 750-watt/120-volt tripod scene lights.  The emergency warning light package is a complete Whelen Super LED package with a Federal Q2B siren on the front bumper extension.

For more information about this custom pumper contact:
Custom Fab and Body
158 U.S. Hwy 45
Marion WI 54950
Phone: (715) 754-5316
Fax: (715) 754-2903

For General Sales Information, email
Visit our web site @

- Home Page - Site Index - Contact Us - Fire Apparatus -
- Commercial Applications - Custom Fabrication - Product Gallery -

Page created July 3, 2013
Page edited January 2, 2018