|
Search
Contact Us
About Custom Fab and Body
Fire Apparatus
Rescue Apparatus
Refurbishments
Commercial Applications
Product Gallery
Map / Directions
Main
You can also
download a
print-able
data sheet
|
Custom Fab and Body Recent Deliveries
Kekoskee, WI
Kekoskee Fire Department, Wisconsin
Aluminum Bodied Pumper-Tanker
This pumper/tanker apparatus for the Kekoskee Fire Department
was built on a Sterling LT9500 chassis. The apparatus body is an all aluminum
structure with slide in in ladder and hard suction hose storage, ladders right side
and suction hose left side, with rear door. There is a Ziamatic Quic Lift portable
tank system installed at the right side of the body recessed into the body side.
The pump on the apparatus is a Waterous model CS with a rating of 1250
GPM midship mounted with a side control panel. The pump is supplied with a
Foam Pro 2001 foam injection system. A Foam Pro Power Fill is also installed for
filling purposes. The pump is equipped with (2) gated 6” suction inlets, (2) 2 ½”
auxiliary inlets, (2) 1 ½” cross-lays, (1) 2 ½” cross-lay, (5) 2 ½” discharges, (1)
LDH discharge w/3” valve and 5” storz adapter, and a 3” deluge discharge
equipped with a TFT Extenda-Gun. The water tank is United Plastics Fabricating
3000 gallon water/30 gallon foam Poly Tank IIE. At the rear of the tank there are
(3) Newton manual operated dump valves with manual telescoping chutes. Low at
the rear, under the rear dump valve, is (2) 4” tank fills with butterfly valves with 4”
cam lock adapters. The tail lights on the apparatus are Whelen LED and the
entire warning light system is Federal LED with halogen scene lights.
Repeat Customer!
See the Kekoskee Rescue
|
For more information about this aluminum Pumper-Tanker contact:
Custom Fab
and Body
158 U.S. Hwy 45
Marion WI 54950
Phone: (715) 754-5316
Fax: (715) 754-2903
For General Sales Information, email
sales@cfbody.com
Visit our web site @ www.cfbody.com
|
|