|
|
W13910 U.S. Hwy 45 Tigerton, WI 54486
|
This pumper was built on an International 4400 series chassis with a diesel engine and automatic transmission. The pump operator’s panel is a fully enclosed crew cab with seating for three (3) firefighters with SCBA seating. The pump is also controlled from this location. The speed lays are plumbed and stored under the crew area, removable bench seat for ease in repacking the speed lays. The pump is a Waterous CSYBX 1250 GPM single stage pump. The water tank has a capacity of 1000 gallons of water and 20 gallons of foam concentrate. The pump is supplied with a Foam Pro 1600 foam proportioner. The apparatus body is entirely constructed from aluminum and has high side compartments on the driver’s side only. The ground ladders are stored above the passenger side low compartments and the suction hose is stored one (1) each side, under the tank “T” sections. There are four (4) SCBA bottle compartments in the rear wheel wells, and there are eight (8) SCBA bottle brackets and straps in the front two (2) high side compartments. The apparatus is equipped with Code 3 halogen warning lights and Federal siren & speaker. This unit was finished off with stainless steel wheel simulators.
For more information about this Aluminum Bodied Commercial Pumper, contact:
|
175 Indian Point Road Oshkosh, WI 54901 Ph: 800/236-3610 -or- 920-235-3610 Fax: 920-235-3287 |
W13910 U.S. Hwy 45 Tigerton, WI 54486 Ph: 715-754-5316 Fax: 715-754-2903 email: cfbody@frontiernet.net web address: www.cfbody.com |
This page, as well as all other cfbody.com's web pages and contents,
are created and maintained by Custom Fab and Body
This web page created July 4, 2005 -dhohn
This web page last revised July 7, 2005 -dhohn