|
Search
Contact
Us
About Custom Fab and Body
Fire Apparatus
New Apparatus
Refurbishments
Commercial Applications
Product
Gallery
Map / Directions
Main
You can also
download a
print-able
data sheet |
Custom Fab and Body Recent Deliveries
Little Rice, WI Fire Department
Little Rice, Wisconsin
Aluminum Bodied Commercial Pumper
Built on a Freightliner M2 chassis, 300HP engine and
automatic transmission. This truck is equipped with a custom,
fully enclosed top mount pump control module directly behind the cab.
In the heated enclosure there is a removable bench seat w/3 SCBA
backrests w/bottle clips and seatbelts, dome lights, defroster fans, a
pass through from the cab to enclosure, and all the pump controls.
There are two 1-1/2” cross-lay discharges located under the removable
bench seat for the ease of repacking. There are a total of (4)
2-1/2” discharges located on the apparatus; 1-left, 1-right, and
2-rear. Plumbing and a mounting plate for a deck gun are
installed directly behind the enclosure in a position where the pump
operator can control it through the rear-sliding window. The two
side 6” inlets are equipped with manually controlled butterfly valves
w/a hand wheel control at the pump panel. The body consists of
the dual high side configuration w/Gortite rollup doors. There are
two-rear slide in compartments w/aluminum diamond plate doors.
One is storage for the customer’s portable folding tank w/a plastic
lumber floor and a roller at the rear for ease of loading and
unloading. The other compartment is storage for two lengths of
6”X10” PVC suction hose (1) at the top and (1) at the bottom. In
between the suction hose is where the 24’ 2-section, 14’ roof, and 10’
folding ladders are stored along w/2 pike poles. In the wheel
wells there is a total of 4 SCBA bottle compartments, 2 each side.
Also on board there is a 6KW Harrison hydraulic generator which is
installed in the dunnage area directly behind the pump operator
enclosure w/a digital readout on the pump panel. The generator
operates (2) 500 watt telescoping Tele-Lites, (2) sealed outlet boxes
located (1) each side of the pump enclosure. Lighting consists
of Weldon 26° scene lights; 1 each side & 2 rear, Weldon halogen
taillights and backup lights, LED clearance lights, Emergency lighting
consists of Federal lights including light bar (Street Hawk),
intersection & low level halogen flashers (GH3F), Sentry rotators, &
head light flasher w/high beam over ride. The siren & speaker
are also Federal (PA300 & Dyna Max). Finishing off the apparatus,
Realwheels wheel simulators were installed.

Little Rice, WI Fire Department also took delivery of
a custom commercial pumper / tanker. This unit was also ordered
from Custom Fab and Body. See the delivery write-up
here.
|
For more information about this Aluminum Bodied Pumper contact:
Custom Fab
and Body
158 U.S. Hwy 45
Marion WI 54950
Phone: (715) 754-5316
Fax: (715) 754-2903
For General Sales Information, email
sales@cfbody.com
Visit our web site @ www.cfbody.com
|
|