This 3500 gallon Poly Wet-side tanker was built on a Kenworth chassis. The lower skirting and compartments are constructed from aluminum. There are 3-electric actuated Newton dumps provided, one (1) rear and one (1) at each side. There are aluminum diamond plate manual fold down extension chutes provided on each dump valve. At the rear there are two (2) tank fills; one (1) 4” manually operated butterfly valve w/Storz adapters and one (1) 2-1/2” manually actuated Akron ball valve. Also at the rear there is a Class 1 “Intelli-Tank” water level gauge. There is storage for a 3000 gallon portable tank through the water tank above the rear dump valve. There is another portable tank provision in the hose bed of the truck also. The apparatus is supplied with a CET portable pump in the right side compartment plumbed with a tank to pump line and a tank fill for recirculation. (This pump is for discharge only not filling purposes.) The apparatus is equipped with a Code 3 MS7000 light bar and 550 rotating beacons for upper level warning and Weldon halogen flashers for low level warning. There is a Federal siren and speaker also provided on the apparatus.